CCS2 40kw 7 Inch Touch Screen Dual Gun DC Charging Pile
Product Description
Safety Function of DC EV Charger:
Charging gun temperature detection, over voltage protection, under voltage protection, overload protection, short circuit protection, grounding protection, over temperature protection, low temperature protection, insulation monitoring protection, polarity reverse protection, lightning protection, emergency stop protection, leakage protection. Paramenters
| Model | SS-DC-40-Y-B-O-4 |
| Installation Method | Floor stand mounted |
| Product size (mm) | 1554 (Including base）*620*300 (mm) |
| INPUT | |
| Voltage | AC380V ± 15% |
| Input frequency | 50/60Hz |
| Single Gun Output Current Range | GB/T: 0-125A |
| OUTPUT | |
| Voltage | 200-1000 VDC |
| Rated power KW | 40kW |
| Charging cable length | 5m |
| Accuracy | Level 1.0 |
| Electrical Specification | |
| Current Limit Protection Value | ≥110% |
| Voltage Stabilization Accuracy | ≤±0.5% |
| Current Stabilization Accuracy | ≤±1% |
| Ripple Ratio | ≤±0.5% |
| Efficiency | ≥95% |
| Power Factor | ≥0.99 (above 50% load） |
| Harmonic Content THD | ≤5% (above 50% load） |
| RCD | Type AC 30mA |
| Functional Design | |
| Human-computerinteraction | 7- inch highlight color touch screen |
| Charge mode | / |
| Charging method | NFC (Swipe to charge), scan QR code to charge |
| Payment Methods | Swipe the card, scan QR code, Password |
| Networking methods | Ethernet/4G |
| Executive standards | EN IEC 61851-1:2019, EN 61851-23:2014, EN IEC 61851-21-2:2021, EN IEC 61000-6-1:2019 |
| EVSE to Backend | OCPP1.6J |
| Environmental Indicators | |
| Working Temperature | -20℃ ~ +50℃ |
| Working Humidity | 5%~95% non-condensing frost |
| Working Altitude | ＜2000m |
| Ingress Protection | IP54 |
| Cooling Method | Air-cooled |
| Noisy Control | ≤60dB |
| MTBF | 17520 hours |