5" Red Auto Detailing Clay Bar Wipe DA Polisher Pad Car Clay Pad Auto detailing clay is used to remove dust, dirt, industrial fallout, acid rain, and other contaminants from your car's exterior surfaces. Known as "claying," the process involves removing particles that stick to the clay when it is rubbed along the car's surface. Claying is most commonly used on paint, but also works on glass, fiberglass, and metal. When done properly, claying is non-abrasive and will not damage your car. Steps:1. Wash and dry your car thoroughly to remove as much of the dirt, grime, and other contaminants from the surface as possible. 2. Spary water on the clay pad and car paint. 3. Spray clay lubricant generously over the clay bar, Water will work better as a lubricant. 4. (by hand or D/A polisher) Add more lubricant if the clay sticks while you're trying to slide it or keep watering on the clay bar. 6. keep cleaning until you have a clean surface. 7. Wipe the car using a clean microfiber tow
