SS-G101
Sino Star
| Quantity: | |
|---|---|
Product name : Black tornado spray gun
Model number: SS-G101
Technical Specification:
| Model | SS-G101 |
| Weight | 1.45KG |
| Rotationl Speed | 12000rpm |
| Air Pressure | 0.4 to 0.8 Mpa |
| Application | remove stubborn stains in car interiors |
| Solution | PH=7 |
| Operate TEMP | 10-40 |
| Spray particle | 5UM-10UM |
Function:
It can remove stubborn stains on the surface of the mat, leather, plastics, dial plates and other automobile interiors Cleaning more strong, more fast.
MAINTENANCE METHOD:
Please disboard the cleaning pot and flush the iron ball to the tap until the dirt which from strainer inside the ball is deaned completely. if the tool will not spray liquid during using.
When you use it, please not make the bell mouth touch the part, otherwise, will damage the tube. you should keep 2-3cm distance from the part.
You have to clean and dry the tool after using it, otherwise, the liquid wuill damage inside the tool due to the dust and bacteria, so that cut down the working lift.
Clean method: make the bell into the water and hold down the trigger, then dry it and put it on the place where ventilated. Dry and have not sun shine. As below:
Clean the equipment, you only put the bell into the water and hold down the trigger about 1-3 seconds.
Use Method
Product name : Black tornado spray gun
Model number: SS-G101
Technical Specification:
| Model | SS-G101 |
| Weight | 1.45KG |
| Rotationl Speed | 12000rpm |
| Air Pressure | 0.4 to 0.8 Mpa |
| Application | remove stubborn stains in car interiors |
| Solution | PH=7 |
| Operate TEMP | 10-40 |
| Spray particle | 5UM-10UM |
Function:
It can remove stubborn stains on the surface of the mat, leather, plastics, dial plates and other automobile interiors Cleaning more strong, more fast.
MAINTENANCE METHOD:
Please disboard the cleaning pot and flush the iron ball to the tap until the dirt which from strainer inside the ball is deaned completely. if the tool will not spray liquid during using.
When you use it, please not make the bell mouth touch the part, otherwise, will damage the tube. you should keep 2-3cm distance from the part.
You have to clean and dry the tool after using it, otherwise, the liquid wuill damage inside the tool due to the dust and bacteria, so that cut down the working lift.
Clean method: make the bell into the water and hold down the trigger, then dry it and put it on the place where ventilated. Dry and have not sun shine. As below:
Clean the equipment, you only put the bell into the water and hold down the trigger about 1-3 seconds.
Use Method
